A collection of active and interface materials for a variety of innovative thin film electronic devices from photovoltaics to LEDs to transistors and sensors.
Semiconducting polymers for bulk heterojunction, OPV, OLED and perovskite interfaces.
PCE10 (PBDTTT-EFT)From £319
PCE11 (PffBT4T-2OD)From £308.60
PFO (F8)From £125
PTAA (OFETs applications)From £98
DPPDPyBT (high mobility n-type polymer)From £249
DPP-DTT (high mobility p-type polymer)From £198.60
PTAA (perovskite applications)From £171.60
PCE12 (PBDB-T)From £318.70
PNDI(2OD)2T | P(NDI2OD-T2)From £339.30
Ossila supplies a range of PEDOT:PSS dispersions that are suitable for a range of applications including Al 4083 for OPV and OLE devices, PH 1000 for high conductivity films and HTL Solar dispersions designed to improve the wetting of difficult surfaces.
PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrene sulfonate) is a transparent conductive polymer consisting of a mixture of two ionomers. Due to its unique combination of conductivity, transparency, ductility, and ease of processing, PEDOT:PSS has become a benchmark material in thin-film electronic fabrication. PEDOT:PSS can be used as an interfacial layer for hole transport in organic light emitting diodes, organic photovoltaics, and perovskite photovoltaics. It can also...
Perovskite precursor inks to kick-start your perovskite photovoltaic research
Perovskite Precursor Ink (for Air Processing)
Now selling bulk orders of 30ml with a 25% discount over our standard order sizes. I101 perovskite Ink has been specially formulated in the Ossila laboratories to be deposited by spin-coating. Our I101 perovskite ink is designed for air processing in low humidity environments. Using a mixture of methyl ammonium iodide (MAI) and lead chloride (PbCl) dissolved in dimethyl formamide our I101...
Perovskite Precursor Ink (for Nitrogen Processing)
Now selling bulk orders of 30ml with a 25% discount over our standard order sizes. A formulation of methylammounium iodide (MAI), PbCl2 and PbI2 at a molar ratio of 1:1:4 (PbCl2:PbI2:MAI) in a DMF solvent. On processing, I201 ink can be used to create a CH3NH3PbI3-xClx perovskite film. The process recipe for I201 is optimised for glovebox processing under a...
Perovskite Precursor Materials
Precursor materials for forming perovskite thin films for photovoltaic and OLED purposes.
Formamidinium Bromide (FABr)From £88
Formamidinium Iodide (FAI)From £99
Lead ChlorideFrom £149
MAI (Methylammonium Iodide)From £111
Methylammonium bromide (MABr)From £103
Graphene and 2D materials
Graphene and 2D materials have emerged as promising candidates for transparent and flexible electrodes, electrochemical capacitor devices for energy storage, anticorrosion coatings. Potentially graphene and 2D materials could also be used for biomedical applications such as tissue engineering, sensors and drug deliveries and aerospace applications. Due to its extraordinary properties and relatively low cost, graphene and its derivatives have opened the window of opportunity for researchers to develop materials and devices with novel functionalities and to improve the quality of existing products.
Graphene PowdersFrom £123
Graphene Oxide Powders and SolutionsFrom £100
Nitrogen Doped Graphene Oxide Powders and SolutionsFrom £80
Reduced Graphene Oxide PowdersFrom £201
Molybdenum Disulfide Powders and SolutionsFrom £100
Tungsten Disulfide Powders and SolutionsFrom £100
Semiconducting Small Molecules
Small molecule semiconductors for OFETs and as interface materials to perovskites.