FREE shipping to on qualifying orders when you spend or more, processed by Ossila BV. All prices ex. VAT. Qualifying orders ship free worldwide! Fast, secure, and backed by the Ossila guarantee. It looks like you are visiting from , click to shop in or change country. Orders to the EU are processed by our EU subsidiary.

It looks like you are using an unsupported browser. You can still place orders by emailing us on info@ossila.com, but you may experience issues browsing our website. Please consider upgrading to a modern browser for better security and an improved browsing experience.

Source-Drain Deposition Mask, High Density

Substrates and Fabrication


Product Code E321
Price £26 ex. VAT

Shadow masks for deposition of source-drain contacts. Designed for use in the Evaporation Stack for High Density OFETs with our standard sized substrates of 20 x 15 mm. Each mask produces 20 OFETs on a single substrate. We sell a selection of masks for different precisions in linear and interdigitated patterns.

If you would like to mix and match geometries, please contact us.

General Mask Specifications

Mask dimensions 20 x 15 mm
Number of OFETs 20
Contact pad size 1 mm x 1 mm
Contact pitch 2.54 mm (0.1")
Mask material Electroformed nickel
Compatible products

Evaporation stack

Glass Substrates

ITO substrates

Silicon substrates

Individual Mask Specifications

Product Code E321 E322 E323
Channel Geometry Linear Linear Interdigitated
Channel Width 1 mm 1 mm 18.23 mm
Channel Length 30 µm 30, 40, 50, 60, 80 µm (4 of each) 50 µm
Tolerance ± 7 µm ± 7 µm ± 7 µm
Mask Thickness 30 µm 30 µm 30 µm

Linear 1 mm x 30 µm (E321) and 1 mm x 30 µm variable (E322)

30 micron channel length evaporation mask (dimensions)
Dimensioned Details
30 micron channel length evaporation mask (single device)
1.5x Microscope image of individual OFET
High density linear OFET shadow mask (channel closeup)
5x Microscope Image of individual OFET
Linear channel length OTFT evaporation mask (30 microns)
Optical Image of Mask

Interdigitated 18 mm x 50 µm (E323)

Interdigitated OFET shadow mask 30 microns - single device
1.5x Microscope image of individual OFET
OFET interdigitated shadow mask channel close up
5x Microscope image of individual OFET
High density interdigitated shadow mask
Optical image of mask

Assembly Video

PLEASE NOTE: The magnetic sheet should now be placed on top of the lid, so that it can be taken off while the substrates are still secure in the stack, thus avoiding damage to the substrates.

This video demonstrates how to load the high density OFET stack typically used to thermally evaporate (vacuum deposit) source-drain contacts. The video shows the below steps:

  1. Loading the interchangeable source-drain masks into the lower support (this is combined with the substrate holder).
  2. Loading the substrate
  3. Screwing the lid on.
  4. Adding the magnetic sheet

Learn more and get started with high density OFETs

The high density OFET fabrication system makes it simpler and quicker to make and test a large number of devices for statistical and optimisation purposes. Find our more by viewing our high density OFET overview and schematic, contact our OFET team or buy the high density OFET stack.

Troubleshooting

The mask is designed in such a way that during the deposition of the gate electrodes on the corner of the substrate the metal should cover the edge of the substrate as well. This ensures conductivity between the metal electrodes and the p-doped silicon. If you find the edges of the substrate not to be conductive you must scratch the edges of the substrate to remove the insulating silicon oxide in correspondence with the corner where the gate electrode will be deposited.

Prefabricated OFET: gate electrode details
Prefabricated OFET: details of the gate pad/doped silicon electrical contact.
Return to the top